Keep Gas-Containing Bottles in Spec at 600 Bottles per Minute
High-speed packaging lines need leak control that keeps up with production, stays synchronized with the conveyor, and avoids unnecessary rejects. The PE Bottle Squeeze Leak Detection Machine is positioned as an inline solution for pressure and leak inspection of specified gas-containing containers. It combines belt squeeze detection, dual-sensor measurement, and digital signal processing so inspection can run continuously on an automated line.

How the PE Bottle Squeeze Leak Detection Machine detects leaks inline
The PE Bottle Squeeze Leak Detection Machine uses an online method designed to reflect internal pressure characteristics through belt squeezing. In the extrusion schematic described for this PE Bottle Squeeze Leak Detection Machine, a guide mechanism at the front pre-squeezes PE bottles to create a specific internal pressure. If a container leaks, pressure is released during conveying.
A common way the PE Bottle Squeeze Leak Detection Machine is described is through a Pressure 1 / Pressure 2 comparison:

This belt squeeze pressure comparison approach is central to how the PE Bottle Squeeze Leak Detection Machine supports inline leak detection without stopping normal conveying.
Throughput and detection specifications buyers typically check first
For engineering teams, speed alone is not enough; inspection range, stability, and reject performance determine whether a PE Bottle Squeeze Leak Detection Machine will hold a reliable standard over long shifts.
The PE Bottle Squeeze Leak Detection Machine performance and parameters include:
| Item | Specification |
|---|---|
| Maximum inspection speed | Exceeds 600 bottles/minute |
| Detection range | 0.08 to 0.5 MPa |
| Accuracy | Better than 0.02 MPa |
| Rejection rate | ≥99.99% |
| False reject rate | ≤0.03% |
A practical note included with the PE Bottle Squeeze Leak Detection Machine accuracy statement is that excessive vertical vibration of the conveyor chain can affect results. Rapid temperature changes and uneven bottle wall thickness can also influence inspection outcomes and contribute to false rejections.
Why adaptive speed tracking matters on fast lines
One feature highlighted for the PE Bottle Squeeze Leak Detection Machine is adaptive speed tracking. The machine automatically adjusts to production line speed and stops when the line stops—a behavior intended to help prevent containers from being jammed or damaged during idle operation.
The PE Bottle Squeeze Leak Detection Machine is also described as supporting high-speed impacting, aligning with the need to remove non-conforming products while keeping production moving.
Operator visibility with HMI monitoring and alarms
Inline inspection only helps when operators can see what the system is doing and react quickly to abnormal conditions. The PE Bottle Squeeze Leak Detection Machine includes a human-machine interface (HMI) for operation and monitoring.
Documented HMI and control functions for the PE Bottle Squeeze Leak Detection Machine include:
Together with the DSP processing described for the PE Bottle Squeeze Leak Detection Machine, these functions support day-to-day monitoring and stable inline use.
Installation conditions that support stable squeeze measurements
The PE Bottle Squeeze Leak Detection Machine installation guidance emphasizes line layout, utilities, and environmental stability. Key requirements include:
The PE Bottle Squeeze Leak Detection Machine guidance also recommends inspecting products after cooling, or on a single-row conveyor belt where product temperature is uniform, to improve consistency.
Applicable inspection objects and related equipment
The PE Bottle Squeeze Leak Detection Machine is described as applicable to:
In addition to the PE Bottle Squeeze Leak Detection Machine, related pressure inspection equipment is listed as the Can Pressure Tester. Other related products shown alongside this category include the Code Inspection Machine and the Weighing and Inspection Machine.


