Company News
For high-speed PET beverage lines, inspection must happen continuously without slowing production. Our Cap and Liquid Level Inspection Machine is designed for online inspection of PET bottles after filling, covering cap defects, anti-theft ring condition, liquid level accuracy, and inkjet printing
2026/07/20 14:43
A Cap and Liquid Level Inspection Machine is used on bottling and packaging lines to check two quality points that directly affect finished product consistency: cap condition and liquid fill level. For buyers, however, inspection performance is not determined by the machine alone. Before
2026/07/17 11:31
Inline inspection is a practical safeguard for PET bottling lines where cap placement, fill level, anti-theft ring condition, and inkjet coding must be checked before products move into downstream packaging. A Cap and Liquid Level Inspection Machine is designed for online inspection and automatic
2026/07/16 09:11
In high-speed PET bottling, a single missing cap, low fill, broken anti-theft ring, or unreadable inkjet code can move quickly from the filler to secondary packaging. A Cap and Liquid Level Inspection Machine is designed to inspect these critical points online, using sensors, CCD cameras, image
2026/07/16 09:06
On a modern filling line, a bottle can look acceptable at a glance while still carrying a costly defect: a low fill level, a tilted cap, a missing tamper-evident band, or an unstable closure. A Cap and Liquid Level Inspection Machine is designed to place these checks into one inline inspection
2026/07/15 09:20
In PET bottle production, an unreadable inkjet code can create the same downstream risk as a poor seal or incorrect fill level. A Cap and Liquid Level Inspection Machine brings these critical checks into one inline inspection point, covering cap condition, anti-theft ring status, liquid level
2026/07/15 08:46
Selecting a Best Bottle Inspection Machine is not only a question of speed or detection accuracy. For PET and PE bottle lines, stable performance also depends on whether the workshop environment, power supply, compressed air, grounding, and conveyor integration match the system requirements. On a
2026/07/13 11:46
In high-speed PET and PE bottle production, the finish area is a small detail with a large quality impact. Deformation, chipping, through-holes, or sealing surface damage can affect capping stability and increase downstream rejection. For a 48,000 bottles per hour packaging line, the MT-PK021
2026/07/13 11:38
In PET and PE bottle production, bottle finish quality affects sealing stability, capping reliability, and downstream filling performance. The Best Bottle Inspection Machine is designed for inline, non-contact inspection of bottle mouth deformation and surface damage. By combining sensor
2026/07/11 08:57
In high-speed PET/PE bottle production, finish quality is not a small detail. A damaged or deformed bottle mouth can affect sealing performance, filling stability, and downstream rejection cost. The Best Bottle Inspection Machine is therefore judged not only by line speed, but by whether its image
2026/07/11 08:50
In high-speed PET and PE packaging lines, the performance of a Best Bottle Inspection Machine depends heavily on one practical factor: whether the image acquisition system can capture the bottle finish clearly, consistently, and at the right moment. The MT-PK021 Bottle Finish Inspection Machine is
2026/07/10 08:45
The Best Bottle Inspection Machine is designed for non-contact, online inspection of bottle finishes before bottles move into the next production stage. It uses a synchronized sequence of positioning sensor, encoder, camera, image processor, HMI, control unit, and rejector to identify each bottle,
2026/07/10 08:39
