Company News
Our PET Bottle Mouth Inspection Machine is designed for automated, non-contact online inspection of bottle mouths on high-speed PET/PE bottle packaging lines. In PET and PE bottle production, the bottle finish is one of the most important quality points because it directly affects sealing
2026/07/07 08:54
In PET and PE packaging lines, the bottle mouth is one of the most important areas for sealing performance. A damaged finish, chipped edge, penetration defect, or oval neck can affect the way the cap fits after filling. Our PET Bottle Mouth Inspection Machine is designed for fully automated, non-
2026/07/07 08:48
In high-speed PET and PE bottle production, the bottle finish is a small area with a large impact. Damage, deformation, or chipping on the sealing surface can lead to poor capping, leakage, contamination risk, and unnecessary rejection after filling. The PET Bottle Mouth Inspection Machine, model
2026/07/06 11:57
In beverage and packaging production, the bottle finish is where sealing quality is won or lost. A small chip, through-hole, or oval neck can affect capping stability and increase the risk of leakage. The PET Bottle Mouth Inspection Machine is designed for fully automated, non-contact online
2026/07/06 11:48
Bottles Mouth Inspection Machine protects one of the most critical areas of a container: the sealing finish. Chips, through-holes, edge damage, and oval deformation can compromise capping quality, create leakage risk, or interrupt downstream production. By combining positioning sensors, encoder
2026/07/02 08:50
In high-speed PET and PE bottle production, a Bottles Mouth Inspection Machine depends on more than processing speed. The decisive factor is consistent image acquisition: stable lighting, clear focus, controlled brightness, and synchronized capture. When the bottle mouth appears as a clean,
2026/07/02 08:44
Maotong PET Cap Sealing, Liquid Level, and Inkjet Code Inspection: Machine Vision Empowering Intelligent Quality Control on Beverage Production LinesIntroductionIn modern high-speed production lines for PET-bottled products such as beverages, mineral water, and daily chemicals, cap sealing quality
2026/06/29 08:48
In high-speed PET and PE bottle production, the bottle finish is a small area with a large impact. A chip, through-hole, deformation, or sealing-surface defect may not look serious at first, but it can affect capping performance and increase the risk of leakage after filling. For production lines
2026/06/27 11:26
A Bottles Mouth Inspection Machine is only as stable as the site conditions around it. On PET and PE bottle lines rated up to 48,000 bottles per hour, buyers should confirm noise, power, compressed air, temperature, humidity, altitude, flooring, and storage requirements before installation. These
2026/06/27 11:18
The Bottles Mouth Inspection Machine is designed for the Online Bottle Finish Inspection System, supporting automatic, non-contact inspection of bottle finishes during production. With a rated capacity of 48,000 bottles per hour, the system focuses on deformation, breakage, chips, through-holes,
2026/06/26 08:58
For beer producers running high-speed filling lines, fill-level stability directly affects product consistency, package quality, and downstream efficiency. Our Beer Level Detection Machine is part of the Liquid Level Detection System, model MT-HFX-06, designed for real-time liquid level detection
2026/06/26 08:50
A Beer Level Detection Machine is designed for inline liquid level inspection after filling, helping beverage producers identify low-fill and high-fill containers before defective products continue downstream. On brewery and beverage lines, the real value of a beer level detection machine depends
2026/06/23 10:46
