News Center
In high-speed PET and PE bottle production, finish quality cannot be treated as a final check. At 48,000 bottles per hour, a small sealing surface defect can quickly become a filling, capping, leakage, or rejection issue downstream. For buyers comparing the Best Bottle Inspection Machine for a 48,…
2026/07/09 09:51
For PET and PE packaging lines, the bottle finish is more than a small molded detail. It is the sealing interface that supports cap fit, airtightness, and downstream production stability. A PET Bottle Mouth Inspection Machine helps production teams turn this critical area into a measurable quality…
2026/07/09 09:46
The PET Bottle Mouth Inspection Machine is designed for inline, non-contact inspection of PET and PE bottle finishes. Installed at the bottle discharge section of a blow molding machine or on a conveyor chain, the PET Bottle Mouth Inspection Machine helps identify deformation and damage on the top…
2026/07/08 08:46
For PET and PE packaging lines, the bottle finish is a small area with a large impact. A damaged sealing surface, chipped mouth, through-hole, or oval neck can affect downstream filling and sealing quality. The PET Bottle Mouth Inspection Machine is designed for fully automated, online, non-contact…
2026/07/08 08:41
Our PET Bottle Mouth Inspection Machine is designed for automated, non-contact online inspection of bottle mouths on high-speed PET/PE bottle packaging lines. In PET and PE bottle production, the bottle finish is one of the most important quality points because it directly affects sealing…
2026/07/07 08:54
In PET and PE packaging lines, the bottle mouth is one of the most important areas for sealing performance. A damaged finish, chipped edge, penetration defect, or oval neck can affect the way the cap fits after filling. Our PET Bottle Mouth Inspection Machine is designed for fully automated, non-…
2026/07/07 08:48
In high-speed PET and PE bottle production, the bottle finish is a small area with a large impact. Damage, deformation, or chipping on the sealing surface can lead to poor capping, leakage, contamination risk, and unnecessary rejection after filling. The PET Bottle Mouth Inspection Machine, model…
2026/07/06 11:57
In beverage and packaging production, the bottle finish is where sealing quality is won or lost. A small chip, through-hole, or oval neck can affect capping stability and increase the risk of leakage. The PET Bottle Mouth Inspection Machine is designed for fully automated, non-contact online…
2026/07/06 11:48
Bottles Mouth Inspection Machine protects one of the most critical areas of a container: the sealing finish. Chips, through-holes, edge damage, and oval deformation can compromise capping quality, create leakage risk, or interrupt downstream production. By combining positioning sensors, encoder…
2026/07/02 08:50
In high-speed PET and PE bottle production, a Bottles Mouth Inspection Machine depends on more than processing speed. The decisive factor is consistent image acquisition: stable lighting, clear focus, controlled brightness, and synchronized capture. When the bottle mouth appears as a clean,…
2026/07/02 08:44
Maotong PET Cap Sealing, Liquid Level, and Inkjet Code Inspection: Machine Vision Empowering Intelligent Quality Control on Beverage Production LinesIntroductionIn modern high-speed production lines for PET-bottled products such as beverages, mineral water, and daily chemicals, cap sealing quality…
2026/06/29 08:48
In high-speed PET and PE bottle production, the bottle finish is a small area with a large impact. A chip, through-hole, deformation, or sealing-surface defect may not look serious at first, but it can affect capping performance and increase the risk of leakage after filling. For production lines…
2026/06/27 11:26
